ISEE | Specialist engineering company in Embedded Systems

VERSATILITY AND INTEGRATION IN A COMPACT AND ROBUST RADAR

The IGEP™ RADAR LAMBDA can accurately measure distance, velocity and physical properties of objects. It includes an IGEP™ v2 for fast radar signal processing and full connectivity. In addition, we supply all the basic open source code to easily interface with the radar and start your specific signal processing application.

HIGHLIGHTS	ADVANTAGES
World wide ISM K-Band covered Configurable CW, FSK and FMCW with different modulation ramps Full connectivity: Ethernet, USB, RS232, RS485, etc. TCP / IP connectivity and real time web wave visualization IGEPv2 Processor board Measure distance, velocity, physical properties.	Compact size, low power consumption Capture the signals from its radar sensor Process them with the included high performance processor Manage this data, build a register, make live graphics, save wave files, etc. Full configuration with built-in webserver.

IGEP RADAR LAMBDA (Code: KITR0010-RA1)

General Specifications

Feature	Specification
K-Band Transmitter	24 to 24,250GHz 30 elements Array Micro-strip Patch Antenna+20dBm E.I.R.P. VCO Amplifier
K-Band Receiver	24 to 24,250GHz 30 elements Array Micro-strip Patch AntennaLow Noise AmplifierMixer for down conversion
DDS	24bit Direct Digital Synthesizer with CW, FSK and linear FMCW capabilities. Programmable through SPI link.
PLL	Highly linear modulations possible thanks to the PLL architecture. Fixed 2048 division ratio.
Filter	32KHz bandwidth filter and other selectable.
A.G.C.	40dB dynamic range Automatic Gain Control Amplifier for distance and reflectivity compensation.
A.D.C.	Analog to Digital Converter configurable from 120 to 1021Ksps
Connectors	1 x USB 2.0 OTG interface only operational when IGEP^™ COM MODULE uses 1 x Power Supply Voltage from 5 V DC +-5% 1 x EXPANSION-I: BASIC INTERFACE CONNECTOR 1 x EXPANSION-II: 28-pin (2,45mm pitch) for IGEP^TMv2 2 x EXPANSION-III: 70-pin 0,4mm pitch CONNECTOR for IGEP^TM COM MODULE 4 x COAXIAL TEST & MONITOR CONNECTORS
Devices	1 x EEPROM
Processor Board	IGEPv2 DM3730 1@Ghz

Main Features

World wide ISM K-Band radar
Integrated array patch microstrip transmitter and receiver antennas
Configurable CW, FSK and FMCW with different modulation ramps
PLL controlled frequency stability
Excellent Modulation Linearity
Low noise Amplifier
IF Preamplifier
Limited Bandwidth for low noise performance
IGEP™ v2 processor board for radar control and fast radar signal processing
Ethernet 10/100 Mb BaseT (SMSC LAN9221i)
Wifi IEEE 802.11b/g (Marvell 86w8686B1)
Bluetooth 2.0 (CSR BC4ROM/21e)
Integrated antenna and connector for external antenna
DVI-D / HDMI Connector.

1 x USB 2.0 OTG (USB 2.0)
1 x USB 2.0 Host (USB 2.0)
MicroSD card reader
JTAG Expansion (Connector not populated)
Expansion: DDS, Camera signals, I/O, uart, SPI, McBSP, I2C, keypad ...
Industrial grade (-40 ... +85C Deg)
RS-232 Transceiver
RS-485 Transceiver
Debug Serial Port
Stereo audio in and out jacks line signal.
Wall plug 5 VDC or JST input
RTC Battery Backup (Optionally)
Web server applicatin for TCP / IP remote control monitoring
Application demo (binnary) for 1 target range and speed measurement